Fix Your Kitchen Extractor Fan: The DIY Guide for Fixing Leaks, Cracks and Drip Issues
When you have a kitchen extractor fan, it’s important to keep it clean and maintain its integrity thought instant fixing. The best way to do this is by taking care of its motor and replacing the filters. This can get expensive, but it doesn’t need to be. Fixing your kitchen extractor fan is easy when you understand how the motor works. When your motor gets dirty or clogged with water, the fan will suddenly stop working or even start leaking. With these easy-to-follow instructions, fixing your kitchen extractor fan can be as simple as cleaning out the filters and buying a new one!
The Kitchen Extractor Fan
The kitchen extractor fan is a must-have for any kitchen. This kitchen appliance is typically mounted on the ceiling and circulates cool air throughout the room, which makes your kitchen feel much more comfortable. Even if you don’t cook, it’s important to have this appliance in your home.
Everything You Need to Know About the Motor
The motor is responsible for making your kitchen extractor fan work. The motor is usually located in the back of the unit.
You can identify a motor that needs to be cleaned by looking at the dust and dirt on the front of it. If there is a lot of debris on your motor, it’s time to clean it!
If you’re trying to figure out how much oil to put into your kitchen extractor fan, you’ll need to know how many revolutions per minute (RPM) your motor is running at.
How To Clean Your Motor And Get Rid of The Drip Issues
The easiest way to get rid of the drip issues is by cleaning out the motor. To do this, you’ll need a screwdriver, some towels, and a bucket.
1) First, remove the screws that are holding the fan in place. You’ll want to keep them because they’re going to help you put it back together!
2) Next, loosen up the grille so that it can be lifted off of the motor housing. You’ll want to keep this too because it’s going to help you put everything back together!
3) Now, use your screwdriver to remove any screws that are holding the old filters in place. Be careful when doing this because if they’re not removed properly, they could damage other parts of your fan.
4) Once all of these screws have been removed, gently lift up on the filter and pull it away from the motor housing. The two sides should separate easily without damaging anything else but if they don’t, just use your screw driver again to pry them apart and then lift off both sides of the filter at once.
Cleaning Your Filter
The first step to fixing your kitchen extractor fan is cleaning out the old filters. Every time you run a load of dishes, it’s important to make sure the filter is clean so that water doesn’t leak. To clean the filter, first remove the screws from the bottom of the filter. You can then loosen and remove the top piece of your filter by pulling on its clips. Once you’ve removed both pieces, remove all of the dirt, dust, and debris from inside your filter by using a brush or vacuum cleaner. Next, wipe down both pieces with a damp cloth to ensure they’re completely dry before reassembling them.
Replacing Your Filters
The first step to fixing your kitchen extractor fan is by replacing the filters. The filters need to be changed twice a year and will last for about six months. It’s important that you take the time to do this so that your kitchen extractor fan doesn’t stop working or start leaking. Replacement blades are easy to find online, as well as in stores like Home Depot.
Understanding the Motor
The motor is the part of your kitchen extractor fan that turns the fan blade.
The motor is made up of three components: a rotor, a stator, and coils. The rotor spins around the poles of the stator.
When you turn on your kitchen extractor fan, it uses electricity from your home to power this motor and starts turning. Anything that gets in between these two parts can cause problems. For example, if the rotor is dirty or has water in it, it will slow down and start leaking or stop working altogether.
Tips for fixing the motor
1. Remove the screws from the bottom of the unit to take it apart.
2. Clean out the sediment and grease that has accumulated in your fan with a vacuum cleaner and compressed air (if possible).
3. Make sure that you’re replacing all filters at once, so they don’t get dirty or clogged.
4. To ensure that your motor is running smoothly again, replace any worn or broken parts as needed!
5. If you have a problem with your motor, there are also DIY guides online that can help you fix it!
A common issue with kitchen extractors fans is a leaking motor casing. When this happens, you might have to do some serious cleaning in order to fix it yourself!
The Importance of Regular Cleaning
There are a few things that you should be doing to your kitchen extractor fan on a regular basis. The most important thing is to make sure the motor is cleaned out and that the filters are changed. When the motor gets dirty, it can cause many problems like leaks and cracked fans. You can tell when your fan needs to be cleaned simply because it’s not working properly or it’s leaking. Don’t wait for this point to happen before cleaning your fan because you’ll be dealing with an even bigger mess. Keeping your kitchen extractor fan clean will keep it operating smoothly and efficiently.
What’s Wrong with My Kitchen Extractor Fan?
If your kitchen extractor fan isn’t working properly, there are a few things that could be wrong. Your motor could be dirty, the blades could be damaged or the blades and motor might just need replacing. In order to fix these problems, you’ll need to take care of your motor and filters first.
If your fan is not leaking water and it’s still not working properly, there are a few more things to check. Perhaps the wire connection is loose or there is something wrong with the fan itself that needs to be replaced. In order to fix this issue, you should determine which part of the fan is broken, then buy a replacement part online or visit a hardware store to find a matching replacement part.
The good news is that fixing your kitchen extractor fan can be as simple as buying new filters and cleaning out your old one!
Conclusion
Having a kitchen extractor fan is a great way to keep your kitchen cool and comfortable. If you are having issues with your kitchen extractor fan, these tips should help you fix the problem.
Image Source: wikihow.com